mathelm - Browse Comments

92 Comments Found    1 2 3 4 Next »

Reply to sony KP-51WS510-convergence ic-help on May 28, 2008

www.PartStore.com

Reply to sony KP-51WS510-convergence ic-help on May 19, 2008

What ever you do, do not try and adjust the convergence before you change out the IC's. You'll never get it back right if you do.

Reply to sony KP-51WS510-convergence ic-help on May 5, 2008

*Double ZAP!*

Reply to sony KP-51WS510-convergence ic-help on May 4, 2008

*ZAP!*

Reply to sony KP-51WS510-convergence ic-help on April 27, 2008

Larry, Do you think could write a small program that automatically posted the link to the download page for the manuals every 2 hours or so? And while you're at it, maybe send a small...

Reply to sony KP-51WS510-convergence ic-help on April 15, 2008

You'll find it here: http://www.techlore.com/group/2/list_downloads And do not try to ajust it before you replace the IC's. Read above.

Reply to sony KP-51WS510-convergence ic-help on April 9, 2008

I'd wait to hear from Larry, and it's hard to tell from a still picture, but I'm thinking your blue convergence is out of alignment.

Reply to sony KP-51WS510-convergence ic-help on March 29, 2008

By READING this thread. You could also find the service manuals that way too. http://www.techlore.com/group/2/list_downloads

Reply to sony KP-51WS510-convergence ic-help on March 21, 2008

Ahh at least he read enough of the thread to see the part about Pando..lol http://www.techlore.com/group/2/list_downloads

Reply to sony KP-51WS510-convergence ic-help on March 16, 2008

http://www.techlore.com/group/2/list_downloads

Reply to sony KP-51WS510-convergence ic-help on March 8, 2008

All the manuals for Sony are fairly similar, so just look in your TV and see which on is closest. All the IC's with their big heat sinks look the same. And there's no way...

Reply to sony KP-51WS510-convergence ic-help on March 7, 2008

There's a link above for the manuals.

Reply to sony KP-51WS510-convergence ic-help on March 2, 2008

I know this is a long thread, but it will anwser all your questions. Do what I do and go through it backwards. You'll find a lot of do's and don'ts. One of the big...

Reply to sony KP-51WS510-convergence ic-help on February 12, 2008

Nothing special on the solder iron, a standard tip will do. If you do it the way I described above you won't need any solder, but get the smallest you can find (Think Radio Shack...

Reply to sony KP-51WS510-convergence ic-help on February 10, 2008

Sweet... But I didn't get a email telling me there was a new post....

Reply to sony KP-51WS510-convergence ic-help on February 8, 2008

Done, but once again, please leave out the periods and what not around your email address. I like to cut n paste here, and my eyes aren't what they use to be...

Reply to sony KP-51WS510-convergence ic-help on February 7, 2008

Wow, someone actually read the whole thread. I have to say, I am impressed. Along with what Larry said, I think a good cleaning every once and a while will go a long way also.

Reply to sony KP-51WS510-convergence ic-help on February 4, 2008

I was going to make a youtube video but this one covers it preaty well. You can do it. The hardest part is getting the board out. Removing the IC's isn't bad, mostly because you...

Reply to sony KP-51WS510-convergence ic-help on February 2, 2008

Done... btw... leave the period off the end of your email when you type it....

Reply to sony KP-51WS510-convergence ic-help on January 26, 2008

Yea, when you start adjusting, you move one grid up and to the right and the whole other side of the screen goes down and to the left. Then if you move one too far,...

Reply to sony KP-51WS510-convergence ic-help on January 26, 2008

No problem, just don't forget the "Do Not Adjust Before Repair Rule" on page 9 of this thread.

Reply to sony KP-51WS510-convergence ic-help on January 22, 2008

Done.. ONE THING EVERYONE SHOULD KNOW..... Do not try to adjust your TV before you make the repair. If you do, it'll be like trying to untangle a ball of twine, in the dark, with...

Reply to sony KP-51WS510-convergence ic-help on January 19, 2008

I think it depends on how much you played with it before the repair. I only know three I've done, and had no problem with the one's that someone didn't try to adjust on before...

Reply to sony KP-51WS510-convergence ic-help on January 17, 2008

IC's are not all the same, that's why we're here..lol I used the cheap one's here, but I do think Larry's right. But in my case: for one, I consider it an easy repair which...

Reply to sony KP-51WS510-convergence ic-help on January 16, 2008

Iwas going to but pando is having issues here, need to reboot but can't because the computer is currently recording some rerun on tv I must have told it to. Try the zip file link...

Reply to sony KP-51WS510-convergence ic-help on January 16, 2008

Not at all, I personally think they should be standard equipment. To Ogre: I say swap out the IC's and see if that works before worrying about the fuse ( hopefully Larry will jump in...

Reply to sony KP-51WS510-convergence ic-help on January 15, 2008

shiju369 said: Hi Can someone send me a copy of the serfice mauel for Sony KP-51ws510 to shiju369@gmail.com Thanks, done.... oh.. and here .... N..... I think you dropped this..... Yea I know...I'm one to...

Reply to sony KP-51WS510-convergence ic-help on January 13, 2008

Yo Larry, I now have 2 D boards...

Reply to sony KP-51WS510-convergence ic-help on January 12, 2008

vader011 said: I know the thread is kind of old, but I would totally appreciate a copy of the service manual for the KP-51WS510 - having a major issue with the flash focus not taking...

Reply to sony KP-51WS510-convergence ic-help on January 12, 2008

Need a email....

1 2 3 4 Next »