Web Page not found

Search results

1. sony KP-51WS510-convergence ic-help

   ... Sony KP-51ws510 crt tv just paid for about 1.5 years old.  Discussion about Convergence problems and leaky CRT that was the ... set for good trying to solder my left nut to the main power feed.  Did you figure out which D board you needed?  I'm still researching ...

   sony51inch - 04/07/2007 - 19:35 - 935 comments

2. Sony TV stuck in standby mode.

   ... 6 blinks also can be Low B+ protection. Unregulated 7.5 v from the power supply to 5v reg IC504 on the A Board. 5v to M Board Q2314  ... me to play in the menus - As soon as I hooked up a video feed to the TV (DVD Player)it shut down and same Stand By lights blinking. ...

   jjeanine - 03/13/2007 - 11:29 - 55 comments

3. Insignia IS-LCD TV 32 HELP

   ... helps it, but in much shorter spurts of time of about 5 to 10 minutes.  The only reliable thing on this tv that dosen't distort is the RF connection.  I have my satellite feed going through there, and it works fine for hours.  The YpBpr connection ...

   krauser1980 - 02/05/2007 - 17:35 - 9 comments

4. Sony Trinitron 32" picture tube gone?

   ... it on...I immediately get stereo sound, but it takes up to 5 minutes or more before the picture comes in. When the picture comes in it's ... thanks you as you sometimes go for several weeks without a feed back from someone you have assisted.. I hope you have a great holiday. ...

   Lill - 11/28/2006 - 03:03 - 4 comments

5. A Video Dictionary

   ... To accomplish this, 4 frames of film are converted to 5 frames of video by inserting an extra field of film frame every other frame: ... of white light coming from a projection lamp. Each color is feed to separate LCD panels which control the about of colored light that ...

   Larry Dillon - 10/11/2006 - 14:45 - 8 comments

6. Sony problem

   ... few seconds.  When it first happened two days ago, it took 5 minutes after I turned the set on for this problem to begin, but now it just ... RF Converter Off, my original problem goes away even if I feed the TV signal from the VCR using the Antenna input on the TV. So, it ...

   Levick - 10/19/2006 - 13:20 - 163 comments

7. Questions and Answers about HDTV

   ... home with less compromise and greater impact.   5.  What is the difference between NTSC, 1080i, 720p and native?     To ... signal is an analog source, such as an analog VCRS or clear feed from your 4DTV, then the color and black-and-white information have been ...

   Larry Dillon - 10/11/2006 - 14:57 - 5 comments

8. The Average Guy's Review of the Delphi XM portable radio

   ... The directions said that the battery life is about 5 to 6 hours (I think). This cannot be true. The few times I took it on the ... following the directions correctly. The satellite feed would cut out from time to time. It is quite frustrating to be listening ...

   Bob - 12/08/2005 - 11:11 - 0 comments

9. Convergence Problem with Hitachi 43FDX01B

   ... sometimes located around the IC's or off the power supply feed that supplys voltage to the amps. could be open.  You may want to read an ... need for technical information!). It turned out to be a 1.5 ohm 1watt which I replaced and hoping against hope turned the set on. ...

   Sagitt88 - 01/05/2006 - 09:50 - 19 comments

10. JVC av 27020 White lines across the top of screen

    ... and Home Theater about 4 or 5 inches from the top coming down now. any ideas, suggestions, i have the TV ... circuit.  Next check the associated sweep power supply feed that feeds the vertical circuit for burnt parts or shorted diodes and ...

    vert306 - 11/18/2005 - 12:05 - 4 comments

Pages