OUR NETWORK: Dijit Community Explore3DTV My Open Router DVRplayground MediaSmart Home See all... About UsAdvertiseContact Us

 
Learn about scoring Forum's Raw Score: 1.97208E7
June 14, 2007 10:53 PM

Categories: Televisions and Projectors

Rating (0 votes)
  • 1
  • 2
  • 3
  • 4
  • 5
Rate This!

Member Avatar

Larry Dillon

Expert
Joined: 06/17/2006

Mitsubishi Convergence IC Part # List (complete


Ref # / Part # / Part Name & Description

CHASSIS: VZ7
MODELS: VS-45605 / VS-50605 / VS-50705 / VS-55705 / VS-60705 / VS-70705
IC8C01 267P141030 HIC- STK392-110
IC8C02 267P141030 HIC- STK392-110

CHASSIS: VZ8
MODELS: VS-45607 / VS-50607 / VS-60607 / VS-50707 / VS-55707 / VS-60707 VS-70707
IC8C01 267P141030 HIC - STK392-110
IC8C02 267P141030 HIC - STK392-110

CHASSIS: VZ9
MODELS: VS-45609 / VS-50609 / VS-55609 / VS-60609 / VS-60719 / VS-70709
IC8C00 267P155010 HIC - STK393-110

CHASSIS: VZ6-V15
MODELS: VS-70803 / VS-80803 / WS-65903 / WS-73903
IC8D01 267P120010 IC-H STK392-040
IC8D02 267P120010 IC-H STK392-040
MODELS: VS-50800 / VS-50803 / VS-60803
IC8D01 267P120010 IC-H STK392-040
IC8D02 267P120010 IC-H STK392-040

CHASSIS: V16
MODELS: VS-50805 / VS-60805 / WT-46805 / WS-55805 / WS-55905 / WS-65905 / WS-73905
IC8D01 267P120010 HIC - STK392-040
IC8D02 267P120010 HIC - STK392-040

CHASSIS: V17
MODELS: WT-46807 / WS-55807 / WS-55857 / WS-55907 /WS-65807 / WS-65857 / WS-65907 / WS-73907
IC8C01 267P150010 HIC - STK392-570
IC8C02 267P150010 HIC - STK392-570
MODELS: WS-55908 / WS-65908
IC8C01 267P150010 HIC - STK392-570
IC8C02 267P150010 HIC - STK392-570

CHASSIS: V18
MODELS: WT-46809 / WS-55809 / WS-55819 / WS-65809 / WS-65819
IC8C01 267P150010 HIC - STK392-570
IC8C02 267P150010 HIC - STK392-570

CHASSIS: V19
MODELS: WS–55859 / WS–55909 / WS–65869 / WS-65909 / WS-73909
IC8C01 267P155010 HIC - STK393-110

CHASSIS: V20B
MODELS: VS-A50 / WS-A48 / WS-A55 / WS-A65
IC8C01 267P141030 HIC - STK392-110
IC8C02 267P141030 HIC - STK392-110

CHASSIS: VK20
MODELS: WT-42311 / WT-A42
IC8C01 267P141030 HIC - STK392-110
IC8C02 267P141030 HIC - STK392-110

CHASSIS: V20
MODELS: VS-50111 / VS-60111 / WS-48311 / WS-55311 / WS-55411 / WS-65311 / WS-65411 / WS-73411
IC8C01 267P141030 HIC - STK392-110
IC8C02 267P141030 HIC - STK392-110

CHASSIS: V21
MODELS: WS-48511 / WS-55511 / WS-55711 / WS-65511 / WS-65611 / WS-65711 / WS-65712 / WS-73711 / WS-B55
IC8C01 267P155010 HIC - STK393-110

CHASSIS: K20
MODEL: WT-42313 / WT-42315 / WT-42413
IC8C01 267P173010 HIC - STK394-250
IC8C02 267P173010 HIC - STK394-250

CHASSIS: V22
MODELS: WS-48313 / WS-48413 / WS-55313 / WS-55413 / WS-65313 / WS-65413
IC8C01 267P173010 HIC - STK394-250
IC8C02 267P173010 HIC - STK394-250

CHASSIS: V23
MODELS: WS-48513 / WS-48613 / WS-55513 / WS-55613 / WS-55813 / WS-65513 / WS-65613 / WS-65713 /
WS-65813 / WS-73513 / WS-73713
IC8C01 267P173010 HIC - STK394-250
IC8C02 267P173010 HIC - STK394-250

CHASSIS: V24
MODELS: WS-48315 / WS-55315 / WS-65315
IC8C01 267P173010 HIC - STK394-250
IC8C02 267P173010 HIC - STK394-250

CHASSIS: V25
MODELS: WS-48515 / WS-55515 / WS-55615 / WS-55815 / WS-65515 / WS-65615 /WS-65815 / WS-73615
IC8C01 267P173010 HIC - STK394-250
IC8C02 267P173010 HIC - STK394-250

"Those who do not know their opponent's arguments, do not completely understand their own".**For complete TV repair kits including parts goto www.TvRepairKits.com

Discussion:    Add a Comment | Comments 1-25 of 679 | Latest Comment | 1 2 3 428 Next »

October 20, 2007 8:46 PM

Larry, you said in another post that you had a convergence manual for a Sony. Any way you could share that with me? Thanks

November 3, 2007 7:15 PM

jayemmess said: Larry, you said in another post that you had a convergence manual for a Sony. Any way you could share that with me? Thanks
yeah i'm also having the same problem with my damm mitsubishi ws-55807 convergence and in need of some help here. I ordered 2 new IC..... solder them in and it still doing the same thing. Can some one please help me with info or manual so i can fix this. I dont have the $300 or so to get this fix so I have to go Bob Vila on this one.

November 4, 2007 7:55 AM

I would like to help you both but without an e-mail address where should I send these treats? To Bob maybe? My crystal ball is broken at the moment I'm afraid. LOL

"Those who do not know their opponent's arguments, do not completely understand their own".**For complete TV repair kits including parts goto www.TvRepairKits.com

November 10, 2007 8:40 AM

 Larry, I have a Mitsubishi HD widescreen T.V. and the light on the front of the set is blinking. I have read some of the information that you have told the other members and it sounds like this is the same problem. Could you send me the manual or schematics for the tv so I can do the testing? The model is a ws-55513 or possibly a ws-55613 I know that it is a diamond series. My e-mail is importautospecial@sbcglobal.net. Thanks. 
 

November 10, 2007 8:46 AM

i am sending you the info that you may need for the repair of the DM board. Good Luck

"Those who do not know their opponent's arguments, do not completely understand their own".**For complete TV repair kits including parts goto www.TvRepairKits.com

December 2, 2007 11:21 PM

I have a Mitsubishi ws-55813 with a green blinking light that will not stop. Im not very handy with TV's but I know someone who is... Larry If you could send me the info you have for fixing this HORRIBLE problem I would really appreciate it. I really want to try fixing it myself without calling someone out to do it. Thank you! My email is Behappii22@gmail.com

December 2, 2007 11:26 PM

be happy, i am sending you out the info you will need to attempt the repair on your big screen TV set. Good Luck

"Those who do not know their opponent's arguments, do not completely understand their own".**For complete TV repair kits including parts goto www.TvRepairKits.com

December 12, 2007 7:24 PM

larry, I have the mitsubishi ws-55613 with the same blinking green light. Its not even 3 years old and I can not get it to turn on.I would really appreciate the information to fix it my self. I hope I am sending this comment to the right place! Please let me know. dlynnmak@comcast.net

December 12, 2007 10:33 PM

There are a couple of threads for this problem, but I get the point. I will send you out the info for your TV set. Good luck with this repair.

"Those who do not know their opponent's arguments, do not completely understand their own".**For complete TV repair kits including parts goto www.TvRepairKits.com

December 13, 2007 7:08 PM

Hello Larry,
I have a Mitsubishi WS-55511 and a few days ago my dog (to the left) chewed up my remote. After he did this my red convergence was wayyy off. I bought a new remote and when I went to correct the red convergence the vertical adjusted but the horizontal wont move.
-----------------------
  Please let me know how to resolve this. If the IC needs replacing then please let me know, I already know the part number I just need confirmation this is the problem. Also if you could let me know the steps in making the replacement I'd sure appreciate it.
Thank you,
Larry
PS: www.EinsteinVomSablerock.com

December 13, 2007 10:42 PM

Larry,

I just stumbled across this forum and it looks mighty helpful!

I'm trying to help a friend with his television.  He ordered a schematic from Mitsubishi and after two months he's still waiting for it (I don't know what is so difficult about having Mitsubishi send a schematic).

Would you happen to have a schematic for a Mitsubishi WS-55311 television you could share?  Thank you and happy holidays.

Regards,

Brian

belkins@xmission.com

December 14, 2007 1:59 PM

Hi Larry, i've a Mitsubishi VS-60805 (7yrs old) whose picture becomes distorted and eventually blacks out. When i turn the TV off and on again the picture comes back but only for 5min and than gets distorted and pitch black again. I can still hear the sounds though. please help me find what's wrong and how i can fix it. is it the convergence boards? if so where are those boards with the STR...numbers located exactly in the hot bed. and before i really dig into it what should i look for/do in order to fix them. i have a decent technical experiences w/ soldering and printed boards but could use some troubleshooting help and manuals. thanks a lot for you advices, lorensps@yahoo.com

December 18, 2007 1:22 PM

I have the VS-50111 Mitsubishi & I know that the convergence IC needs to be replaced.  My problems are:

 #1 I can't find the stk394-160's that I need but I find plenty of Hitachi repair kits that have the 150's.  Are they ok to use?  I want to order a kit so I can replace the fuses also just in case.

#2- Which chassis info corresponds to the V20a? I find chassis models dp14-g, dp15, dp15e, dp05, etc. but can't tell which I need.

Found website to get manual for repair but need above info to find. This link may help others needing manuals or schematics & it's free!

http://www.eserviceinfo.com/

December 31, 2007 6:24 AM

Larry I have a Mits WS65903 Your part #s for the convergence IC's all jive with what I have been told to replace the only problem is where is the little bugger can you help? I am an electrician by trade not an electronics guru but I am willing to take a stab at replacing the unit myself. 

December 31, 2007 6:34 AM

The IC is mounted on a large metal plate called a heat sink. Probably on the opposite side of where you are looking when you open the back of the set. You will need to loosen the chassis and remove several wire ties and slide out the chassis to get to it. Best thing you could do is go to servicemanuals.net and get the service manual for this set. it will show you how it comes apart. Good Luck

"Those who do not know their opponent's arguments, do not completely understand their own".**For complete TV repair kits including parts goto www.TvRepairKits.com

January 3, 2008 9:41 AM

Larry.  I have a Mitsubishi 55 inch.  Model number VS55707.  When I try to do the advanced convergences on the tv it will not let me and the lines for convergence are bowed.  I called a local tv repair shop and they said that the convergence I.C. were out.  They were wanting to charge me $350 dollars to repair it.  I have an electronics background from being in the military and doing electronics.  Do you think that I would be able to replace these myself and if so, where is the best place to get them.  I was also wondering if you would have a repair manual for the tv or if you knew where I could get one.  My email address is morrisstephenmomo@yahoo.com.  I would appreciate any help you could give me.  Thank you.  If anyone else is reading this and has any answers for me I would appreciate that also.

January 3, 2008 10:41 AM

I do not have the service documentation for this model number but you can download one for about 24 bucks from HERE. Open the set and see what type of STK IC it is and then go HERE to find the original IC's. A lot of sites do not carry original replacement but inexpensive factory duds or after market types so be careful where you buy the replacement IC's at. Good Luck

"Those who do not know their opponent's arguments, do not completely understand their own".**For complete TV repair kits including parts goto www.TvRepairKits.com

January 3, 2008 2:01 PM

Hey thanks alot Larry.  I ordered those parts and hopefully it is a success in me replacing them.  Thanks again, and I will let you know what happens.

January 3, 2008 4:04 PM

One more thing, If you turn on the set and you still have a problem, look for the small circuit protectors or the pico fuses that supply the 24 volts plus and minus to the convergence IC's. They go out sometimes when the convergence IC's go bad. If you have an electronic copy of the schematic, you can send me a copy and I will tell you what resistors and the fuses to check before you get the IC's so you can order and replace them in case they are bad. If you wish, send the service manual to techman32k@yahoo.com.

"Those who do not know their opponent's arguments, do not completely understand their own".**For complete TV repair kits including parts goto www.TvRepairKits.com

January 9, 2008 9:05 PM

Larry. I have a Mitsubishi 55 inch TV Model number VS-55601 that is about 10 years old. I have an electronics background so do you think that I would be able to replace these myself and if so, where is the best place to get the IC's. I was also wondering if you might have a repair manual for the tv or if not do you know where I could get one. My email address is kwoodford@comcast.net. I would appreciate any help you could give me. Thanks in advance for any help. Any help from others would be greatly appreciated as well.

January 9, 2008 9:31 PM

Sorry Larry, I just sent a post that didn't include the problem. Based on other posts here and elsewhere, I have a convergence problem where all symptoms lead to blown convergence IC's. Woke up this morning and power went out for about 2 hours and later when TV turned on, the entire screen picture appears bowed. Tried convergence settings but picture is still bowed. Similar to a severe pincushion effect. Thanks again. Kevin

January 10, 2008 6:54 AM

Are you sure about that model number man? I do not even see it listed?

"Those who do not know their opponent's arguments, do not completely understand their own".**For complete TV repair kits including parts goto www.TvRepairKits.com

January 10, 2008 10:33 AM

Larry,

I know,  I checked the list and didn't see any matching models.  The TV is a Mitsubishi Model VS-55601 Rear Projection probably 10-12 years old bought at the Big Screen Store.  I'm stopping by there today to see what I can find out and I'll let you know.  I searched via Google and found many references to this model and some with the same problem I have.  If I can't find much info or if its going to take a long time or cost big $ then I will bite the bullet and get a new hi-def TV.  I already have a Infocus Hi-def Projector in my theatre.

Thanks.

Kevin

January 10, 2008 2:52 PM

Larry,

Could you please send me richlink@egginc.com the documents for replacing the caps on my DM board for a Mitsu WD-52525

January 11, 2008 7:35 AM

Kevin, if the set is that old, you may have problems getting parts for it. You could most likely look inside, mounted on a large metal plates and see what the number is on the convergence IC. It should start with STK.

"Those who do not know their opponent's arguments, do not completely understand their own".**For complete TV repair kits including parts goto www.TvRepairKits.com

Discussion:    Add a Comment | Back to Top | Comments 1-25 of 679 | Latest Comment | 1 2 3 428 Next »

Add Your Reply

(will not be displayed)

Email me when comments are added to this thread

 
 

Please log in or register to participate in this community!

Log In

Remember

Not a member? Sign up!

Did you forget your password?

You can also log in using OpenID.

close this window
close this window