OUR NETWORK: Dijit Community Explore3DTV My Open Router DVRplayground MediaSmart Home See all... About UsAdvertiseContact Us

 
Learn about scoring Forum's Raw Score: 485517.0
January 7, 2006 07:31 PM

Categories: Portable AV

Rating (0 votes)
  • 1
  • 2
  • 3
  • 4
  • 5
Rate This!

Member Avatar

Kaitlynsmom

Member
Joined: 01/07/2006

I was given a used G2G Gear DVD-708 that has audio but no video. The problem is that they didn't have the owner's manual and I can't find a website for the manufacturer that has supportof any kind on it so I have no idea where to even begin in troubleshooting the problem. The DVD does spin and I get audio but no picture - and this model has two screens so I doubt that it's related to the LCD. Can anyone help me out with ideas on where to start looking for problems or better yet where to obtain another manual for this thing? Any and all suggestions will be welcomed! Thanks.

Discussion:    Add a Comment | Comments 1-3 of 3 | Latest Comment

January 9, 2006 10:59 AM

I did a little investigating, and learned that Hasco was the exclusive US distributor for G2G products in the US. However, it looks like Hasco is no longer distributing or selling the product line. According to their site, you can still get technical support information by calling this toll-free number: 1-866-607-8867, which is hopefully still in service.

Here's the web page I found all this on: http://www.hasco-sales.com/pages/1/in...

Good luck, and let us know what happens.

March 5, 2008 4:35 PM

I had a G2G for the car.  What happens is the video monitor spins.  There is a plug (or cable) internally that attaches the monitor to the board in the main unit.  If you keep spinning the monitor (like my kids did) in on direction, the cable get to short and pulls out of the board.  Then no video.  I took min apart and unwound the cable and pluged it back in and it works fine.  The kids were told only turn 1/2 turn to open.  It was a real PITA to fix.  I just bought a new one at Best buy for $149 by Sony.

March 5, 2008 5:10 PM

If the previous comment is correct, this problem is not new. Sharp had the same problem with their small camcorders. Yep, the ones that came out with the LCD screen on the back where the camera portion pivoted on the side of the camera. I replaced quite a few of those flat cables that were torn because the user kept turning the camera clockwise.  A simple fix was implemented to restrict the movement to 270 degrees.

Dan

Discussion:    Add a Comment | Comments 1-3 of 3 | Latest Comment

Add Your Reply

(will not be displayed)

Email me when comments are added to this thread

 
 

Please log in or register to participate in this community!

Log In

Remember

Not a member? Sign up!

Did you forget your password?

You can also log in using OpenID.

close this window
close this window