Hi, friend i have a problem , my mitsubishi tv cs-31303 , i dont know the number of microprocessor number ic700 for buy this piece, i need this information please, I need your help.
waiting you answer
TV Repair Questions? Start Here
Categories: Televisions and Projectors
TechLore has become quite a popular place recently for people with television questions, especially troubleshooting, but also for buying and getting more out of your TV. There has been quite a lot of knowledge gathered here, and I thought it might be helpful to list some of the good resources available in one place for your convenience.
Fixing a TV yourself:
- A Beginner's Guide to TV Repair
- Troubleshooting a TV for a Dead Connection
- My TV is Dead. What should I do?
For Buying/Investigating a new TV:
- How to Find the TV that is Right for You
- Factors to Consider When Choosing a TV
- Understanding the Different Types of TVs
Getting more out of your TV:
- Improve A/V Performance by Using the Best Connections
- What to do if you run out of inputs on your TV
- Four Ways to take your TV with you
Read More In: Televisions and Projectors
My blog will take a practical approach to helping you with some day-to-day ideas on how to get more out of your consumer electronic devices. As I encounter questions and comments from people I meet and help, I will document them here and hopefully they will be of help to other people with similar issues. Enjoy and if you have something that you'd like me to write about, please send me a private message.
View unverified member's comment - posted by stevem14
Good day
We have Panasonic TV comes with convergence IC faulty and I replaced both STK 392-040 from this section after that I've align convergence but its shows some strange things. When TV in convergence mode and cursor on right but left data moves and reversal top and bottom of screen is bent.Finally i decided to replace the convergence processor but its not available.
I'm back...if you get any idea from my explanation please give me reply
Model number of this TV : TX-51P100H
Thanks
Soman
We have Panasonic TV comes with convergence IC faulty and I replaced both STK 392-040 from this section after that I've align convergence but its shows some strange things. When TV in convergence mode and cursor on right but left data moves and reversal top and bottom of screen is bent.Finally i decided to replace the convergence processor but its not available.
I'm back...if you get any idea from my explanation please give me reply
Model number of this TV : TX-51P100H
Thanks
Soman
We have Panasonic TV comes with convergence IC faulty and I replaced both STK 392-040 from this section after that I've align convergence but its shows some strange things. When TV in convergence mode and cursor on right but left data moves and reversal top and bottom of screen is bent.Finally i decided to replace the convergence processor but its not available.
I'm back...if you get any idea from my explanation please give me reply
Model number of this TV : TX-51P100H
Thanks
Soman
I have a Sony color rear video projector Mod. # KPD65WS550 purchased in 2004. When I turn the set on, the sound is there but no picture. After about 20 seconds, the sound goes dead and the set turns off. The front panel light bleaks 10 times and then pauses and then bleaks 10 times and pauses. I need to know what the problem is and the approximate cost to repair
View unverified member's comment - posted by gizzmo
Hi mate..
Sony TV has self fault diagnosing system, this light shows error code..its for your information.
This flashing lights meant by(10 times) fault in power supply.
Normally there is two convergence ic normally start with STK is faulty
1) how to check this IC faulty or not.
There is a dual supply for this section that comes from power supply, commonly -+18 to 20 open this from this section and switch ON the TV . If you can see the picture without convergence replace this IC(picture lines may have curves).
If you need any more explanation please reply me feel free ..Have a lovely happy new year.
Thanks
View unverified member's comment - posted by phillps 27 inch
RSS



View unverified member's comment - posted by diogenes