arinc429 said:Thanks for your advise. Im based in london. Do you anywhere i can get pics from of the board parts ect??Rags said: My tv is Red 10 blinking, with audio but no picture. On the random occasion i might get the screen working, with the 10 red blinks still on. i must confess i have pulled the board out from behind, and i know noting. Its a Sony KP-FX423M91. i have also pulled a wire out and put it back in, and it started a couple times. Random wires, now i dont though. Scared incase it blows or something. Can you help a person in distress??PLS GET SOME HELP FROM SOME ONE WHO CAN AT LEAST SOLDER AN IC.IF YOUR TV IS STILL ON 10 BLINKS AND SOME TIME U HAVE VIDEO ALSO ESPECIALLY U KEEP THE TV OFF FOR MORE THAN 10 HOURS.REPLACE THE IC 8002, IC Part No. MCZ3001DB in D BOARD. IN YOUR TV D BOARD IS ON YOUR LEFT WHILE LOOKING FWD FROM BACK OF TV.BUT DO CARE ABOUT RED, HV THICK WIRE. DONOT REMOVE IT FROM BOARD SIDE, U CAN REMOVE F RED WIRE FROM D BOARD SIDE. I REPEAT GET SOME HELP AND ASK HIM TO REPLACE ABOVE MENTIONED IC. ITS PRICE IS 11 US DOLLARS.BY THE WAY WHAT IS YR LOCATION , ARINC429
Understanding Sony Television Blinking Codes
Categories: Televisions and Projectors
Many of the later model Sony TV’s have a built in self-diagnosis function. If the timer/standby indicator is blinking, this could be an indication of a problem with the unit. The diagnostic blinking will occur automatically with no action required by you to engage it. Read on to learn what these diagnostic codes mean, and how you can use that information to get up and running again.
Read full item
March 20, 2009 2:55 PM
updated: March 20, 2009 3:01 PM
March 20, 2009 3:01 PM
updated: March 20, 2009 3:01 PM
Oranom said:Rags said: My tv is Red 10 blinking, with audio but no picture. On the random occasion i might get the screen working, with the 10 red blinks still on. i must confess i have pulled the board out from behind, and i know noting. Its a Sony KP-FX423M91. i have also pulled a wire out and put it back in, and it started a couple times. Random wires, now i dont though. Scared incase it blows or something. Can you help a person in distress??Hi Rags, I had same problem my TV. Replaced IC8002 on the 'D' board. This is what we did: 1.Bought 2 x MCZ3001D from WES components in Ashfield Sydney Australia for $11.20 (each). 2.Friend had an 18 pin machine spun socket (not the crappy ones on EBAY). 3.Took back off TV 4.Put the 'D' board in service position 5.Noted which way IC8002 chip sat (Where position 1 is), also noted which 2 legs are not soldered. 6.Cut the black plastic that was covering this chip underneath (where D board screws into) as this is easier than removing the 'D' board. 7.De-soldered the IC8002 chip with a proper de-soldering iron. These are expensive though. 8.Soldered in the 18 pin socket. 9. Set the chip into the socket. 10.Tested TV, worked fine. 11. Put it all back together, plugged in Tivo, DVD etc etc etc and all bloody good stuff. 12. I now also have a spare MCZ3001D which is taped to the back of the TV for future replacement, which is now easier since its now in a socket.
Hey Oranom,
Thanks for the advise and great instructions. it looks complex, therefore i will have to hire pro help. Someone came, took a look and said the transformer, which would cost £250GBP. i can get a new samsung for £500, 40". all this 18 pin socket is confussing. got any pics. How much do you think a pro should charge?? and how long a job??
thanking u in advance
March 22, 2009 5:12 AM
updated: March 22, 2009 5:13 AM
Rags said:arinc429 said:Thanks for your advise. Im based in london. Do you anywhere i can get pics from of the board parts ect??Rags said: My tv is Red 10 blinking, with audio but no picture. On the random occasion i might get the screen working, with the 10 red blinks still on. i must confess i have pulled the board out from behind, and i know noting. Its a Sony KP-FX423M91. i have also pulled a wire out and put it back in, and it started a couple times. Random wires, now i dont though. Scared incase it blows or something. Can you help a person in distress??PLS GET SOME HELP FROM SOME ONE WHO CAN AT LEAST SOLDER AN IC.IF YOUR TV IS STILL ON 10 BLINKS AND SOME TIME U HAVE VIDEO ALSO ESPECIALLY U KEEP THE TV OFF FOR MORE THAN 10 HOURS.REPLACE THE IC 8002, IC Part No. MCZ3001DB in D BOARD. IN YOUR TV D BOARD IS ON YOUR LEFT WHILE LOOKING FWD FROM BACK OF TV.BUT DO CARE ABOUT RED, HV THICK WIRE. DONOT REMOVE IT FROM BOARD SIDE, U CAN REMOVE F RED WIRE FROM D BOARD SIDE. I REPEAT GET SOME HELP AND ASK HIM TO REPLACE ABOVE MENTIONED IC. ITS PRICE IS 11 US DOLLARS.BY THE WAY WHAT IS YR LOCATION , ARINC429
I am in Dubai, I asked the location because I have one spare IC. It is my firm belive this IC is also bad in your case, even any Sony dealership/service centre knows about that as it is known issue to them. pls get this IC and ask some electrician to soler it. Photo will not help much for location.Once u remove the D board,which is on yr left looking from back of TV.
March 22, 2009 7:53 PM
I have a series of blinking codes appearing on my Sony Triniron screen. The picture is still working in the background and the sound is not effected, it still funtions normally. One of the codes reads: 00898288 (EFE8), another is: 00893328 (EEEE) Any idea what these codes mean?
Thanks,
JLP
Expert
- member since: 06/17/2006
- rank: 1 of 36411
- 12 articles authored
- 11 forum threads started
- 9840 comments
March 22, 2009 10:29 PM
how many times does the light blink?
"Those who do not know their opponet's arguments, do not completely understand their own".
March 22, 2009 10:58 PM
They blink continually every three seconds in a black rectangular box that covers the bottom half of the TV screen.
March 23, 2009 4:26 AM
arinc429 said:Rags said:I am in Dubai, I asked the location because I have one spare IC. It is my firm belive this IC is also bad in your case, even any Sony dealership/service centre knows about that as it is known issue to them. pls get this IC and ask some electrician to soler it. Photo will not help much for location.Once u remove the D board,which is on yr left looking from back of TV. arinc429@hotmail.comarinc429 said:Thanks for your advise. Im based in london. Do you anywhere i can get pics from of the board parts ect??Rags said: My tv is Red 10 blinking, with audio but no picture. On the random occasion i might get the screen working, with the 10 red blinks still on. i must confess i have pulled the board out from behind, and i know noting. Its a Sony KP-FX423M91. i have also pulled a wire out and put it back in, and it started a couple times. Random wires, now i dont though. Scared incase it blows or something. Can you help a person in distress??PLS GET SOME HELP FROM SOME ONE WHO CAN AT LEAST SOLDER AN IC.IF YOUR TV IS STILL ON 10 BLINKS AND SOME TIME U HAVE VIDEO ALSO ESPECIALLY U KEEP THE TV OFF FOR MORE THAN 10 HOURS.REPLACE THE IC 8002, IC Part No. MCZ3001DB in D BOARD. IN YOUR TV D BOARD IS ON YOUR LEFT WHILE LOOKING FWD FROM BACK OF TV.BUT DO CARE ABOUT RED, HV THICK WIRE. DONOT REMOVE IT FROM BOARD SIDE, U CAN REMOVE F RED WIRE FROM D BOARD SIDE. I REPEAT GET SOME HELP AND ASK HIM TO REPLACE ABOVE MENTIONED IC. ITS PRICE IS 11 US DOLLARS.BY THE WAY WHAT IS YR LOCATION , ARINC429
Thanks for the offer. I was in dubai just 4 weeks ago. I also bought the tv from there, jumbo electronics i think, they said transformer. does the Ic have a roduct code .
Cheers
View unverified member's comment - posted by R. MAHACHI
Expert
- member since: 06/17/2006
- rank: 1 of 36411
- 12 articles authored
- 11 forum threads started
- 9840 comments
March 26, 2009 8:14 AM
look in the technicians corner under the resources tap on the home page.
"Those who do not know their opponet's arguments, do not completely understand their own".
Expert
- member since: 06/17/2006
- rank: 1 of 36411
- 12 articles authored
- 11 forum threads started
- 9840 comments
March 26, 2009 12:42 PM
your very welcome!
"Those who do not know their opponet's arguments, do not completely understand their own".
March 26, 2009 4:35 PM
I have a Sony Triniton SRS BBE and is doing the self diag with 9 blinks. Your Page says Replace D 6116 abd D 8301 on the G Board. How much will this part be cost? In addition I did the Display, Channel(usedup botton),5, volumne Minus, power but the diag screen did not come on do you have any suggestions?
Expert
- member since: 06/17/2006
- rank: 1 of 36411
- 12 articles authored
- 11 forum threads started
- 9840 comments
March 26, 2009 5:04 PM
read trough the nine blink thread here on techlore. there are part numbers as well as where to purchace the parts from, they are not that much retail about 10 bucks or so for both. it is all here on techlore.
"Those who do not know their opponet's arguments, do not completely understand their own".
March 28, 2009 11:01 PM
I'm also having the problem where the power light is blinking red 6 times. I understand from an earlier thread that it may be a bad lamp driver board or a bad lamp. Is this something that a tech would have to come out and check to confirm. If so, any recommmendations on where to contact one?
I have a kdf-55xs955 tv.
Thanks
April 5, 2009 5:00 AM
updated: April 5, 2009 3:14 PM
I have a sony kp-57ws500....the tv will turn itself off then the red light will flash 8 times. From what I can figure out it is a problem with the d-board...i want to know if it is something we can fix or if it needs to be shipped out or taken somewhere.
Expert
- member since: 06/17/2006
- rank: 1 of 36411
- 12 articles authored
- 11 forum threads started
- 9840 comments
April 5, 2009 12:48 PM
with the what? you have me in suspence here!
"Those who do not know their opponet's arguments, do not completely understand their own".
April 6, 2009 2:29 PM
I have a Sony KV40XBR800. The TV does not switch on. When I try to turn it on, the TV just makes a sound as though it is turning on but then suddenly it just switches off. The error message is 7 blinks. Sometimes the TV will turn on after 2 to 3 days of trying. Is this problem worth repairing? What would be the estimated cost? Thanks for your help.
April 6, 2009 10:11 PM
HELLO GUYS I HAVE A SONY KV32TS36 THE HIGH VOLTAGE GOES UP AND DOWN CONSTANTLY LIKE PULSATING UP AND DOWN AS LONG AS THE TV IS PLUGGED IN ANY IDEAS WOULD BE
APPRECIATED.
THANKS ROB
ROB
April 9, 2009 4:42 PM
I have a sony kp-46wt510 that is showing eight blinking lights...i see what I am suppose to look to troubleshoot this...does anyone have a repair manual they can send me?
Expert
- member since: 06/17/2006
- rank: 1 of 36411
- 12 articles authored
- 11 forum threads started
- 9840 comments
April 9, 2009 4:45 PM
Go to the home page here and click on the resources tab bad then go to the technician's corner and look through the upload for that manual.
"Those who do not know their opponet's arguments, do not completely understand their own".
April 9, 2009 4:47 PM
I have a sony kp-46wt510 with eight blinking lights...i guess i am suppose to
Eight blinks - Problem with the audio (AUDIO), unit goes to standby and blinks the self-diagnosis code. Check IC406 audio amp, PS401, and 402. On some projection models of Sony TV sets, this code means that T8005 (flyback transformer), or the associative components in the high voltage circuits are defective on the D board.
does anyone have any idea how i do this?
April 9, 2009 5:00 PM
I need to troubleshoot my sony kp-45wt510 for eight blinking lights...are there any manuals out there for this model?
April 9, 2009 5:10 PM
Larry Dillon said: Go to the home page here and click on the resources tab bad then go to the technician's corner and look through the upload for that manual.
larry...thanks.
i went there and did not see this one...did I miss it, or could it be under a different number?
RSS
