A TechLore "Ask the Experts" Question...

Question:

I just purchased a new Sharp Aquos LC-26D5U TV, and I have Comcast digital cable with a Motorola set-top box. I have the cable box connected to component inputs on my TV, but the HD channels are only showing in SD. How do I get my HD channels to show up in HD? Do I need a wiring diagram?

-submitted by Newbie

Answer:

As long as the Motorola HD cable box is connected to the television's component video input (red, green, blue colored jacks), then the box is properly connected to the display. You have no need for a wiring diagram. Just make sure that you have the television switched to the appropriate input when you wish to view your HD cable box.

You may want to check the main configuration menu of the Motorola HD box. While the unit is off, press the MENU button on the remote control. A setup screen like the one pictured above will appear. Check the setting next to the YPbPr Output. If the current setting is 480i or 480p, HD programs are scaled in resolution when displayed. Set to 720p or 1080i, and HD shows will no longer be scaled.